Exporting Cycle History

QUESTION:

• How do I export the unit's cycle history to a USB?

CATEGORY:

• Operational

RELATED MODELS:

• EZ9Plus, EZ11Plus, Elara11, T-Edge 10, T-Edge 11

WHO CAN SOLVE:

• User, Technician, Sales Rep

ANSWER:

• There are 2 methods that differs depending on the model of the unit

EZ9Plus, EZ11Plus, Elara11

1. Insert USB Flash Drive into the USB port on the unit (bottom right corner on the front of the unit, behind a small plastic door that sits below the keypad)
2. Turn the unit on, if it is currently off. (Steps 1 & 2 are reversable, the Flash Drive can be inserted after the machine is already powered on)
3. After the machine boots up press the up arrow and the down arrow at the same time, do not hold just press
4. The display screen will read “Quick Options”, on that screen there will be a list of functions.
5. Scroll down to export to USB and press the start stop button
6. After selecting export to USB select any of the three cycle history options (last 10 cycles, last 50 cycles, or all cycle history)
7. The machine will export the information onto the Flash Drive device
8. The Flash Drive can then be inserted into a computer and the files can be stored, viewed, and/or printed.

Note: there will be two files exported for every cycle (ex. selecting last 10 cycles will store 20 total files on the Flash Drive) the files that can be viewed on any computer are the .txt files (the .cyc files require an optional software to open). Exporting the cycles onto a Flash Drive will not erase them from the autoclaves internal memory it will only create copies, if the cycle history is lost or deleted from the Flash Drive they could be exported again.

T-Edge 10, T-Edge 11

1. Press the 3 lines in the top left corner (next to house) to access the menus
2. Press the USB icon on the top row
3. Select export history- all cycles
4. Insert USB into front USB port (next to on/off switch and HEPA filter) and select export on the screen